MECHANICAL SEALS
SINGLE SEAL | DOUBLE SEAL | CARTRIDGE SEAL | TANDEM SEAL | REACTOR SEALS | SLURRY SEALS
TEFLON BELLOW MECHANICAL SEAL
Available in : GFT, CERAMIC, SIC, CARBON, TC faces
These Mechanical Seals are Specially Designed for Extremely Corrosive Duties.
These Seal Design Faces are molded with Glass Filled PTFE with Highly Flexible PTFE Bellow.
These are dual directional seals with hydraulically balanced design.
MATERIALS
Seal Ring Faces : Carbon, SiC and TC
Seat Faces : Ceramic and SiC
Elastomer : PTFE and GFT
MOC : SS 316, Hast-C and Alloy 20
Bellow MOC : PTFE + GFT Composite
OPERATING CAPABILITIES
Shaft Dia. : 25mm to 100mm
Pressure : Up to 25 bar
Temperature : -70°C to 350°C
Speed: 3000 r.p.m.
SINGLE COIL SPRING SEAL
Top Seller
These Seals are Cost Effective Seals for Basic Application Equipment such as Centrifugal Pump for handling Crystallizing Slurry, Suspended Solid Slurry, Saturated Chemical Slurry and General Chemical Slurry.
These are Inside Mounted Mechanical Seals in which Spring Design depends on Shaft Rotation.
MATERIALS :
Seal Ring Faces : Carbon, SiC and TC
Seat Faces : Ceramic, SiC and TC
Elastomer : Viton, PTFE, GFT, TTV, EPDM, NBR, Buna-N
MOC : SS 316
OPERATING CAPABILITIES :
Shaft Dia. : 10mm to 100mm
Pressure : Up to 10 bar
Temperature : -20°C to 150°C
Speed: 3000 RPM
MULTI SPRING SEAL
Featured Item
MULTI SPRING SEAL is recommended for clean media application. This Seal Type is for Standard use where Corrosive Liquid are being Processed. PTFE Wedge Construction acts as a Secondary Sealing Member. These Type of Seal designed and used for Petroleum Products, Low Aggressive Chemicals and Refrigerants in Centrifugal pumps.
MATERIALS :
Seal Ring Faces : Carbon, SiC and TC
Seat Faces : Ceramic, SiC and TC
Elastomer : Viton, PTFE, GFT, EPDM, NBR, Buna-N and FFKM
MOC : SS 316, Hast-C and Alloy – 20
OPERATING CAPABILITIES :
Shaft Dia. : 10mm to 100mm
Pressure : Up to 10 bar
Temperature : -20°C to 260°C (Depending upon Elastomer)
Speed: 3000 RPM
DOUBLE CARTRIDGE SEAL
Product Subtitle
Double Cartridge Seal are Recommended for Clean and dirty media application . Seal can tolerate reversal pressure. Double Cartridge Seal is Standard for using where Corrosive Liquid are being Processed.
MATERIALS:
Seal Ring Faces : Carbon, TC and SiC
Seat Faces : SiC and TC
Elastomer : Viton, PTFE, and FFKM
End fitting MOC : SS 316,HAST-C and Carpenter 42
MOC : SS 316 – CHANGE OF MOC ON REQUEST
OPERATING CAPABILITIES :
Shaft Dia. : 20mm to 100mm
Pressure : Up to 15 bar
Temperature : -30°C to 260°C
Speed: 3000 r.p.m.
DOUBLE SEMI CARTRIDGE MECHANICAL SEAL
Designed to handle solids up to 20% by weight. Hydraulically balanced faces for excellent seal reliability. Springs are located outside the process. Flushing helps to lubricate or cool the seal faces from atmospheric side of mechanical seal. They are cost effective for Centrifugal Pumps Handling Crystallizing Slurry, Suspended Solid Slurry, Saturated Chemical Slurry, General Chemical Slurry.
Features :
Slurry seal
Standardized modular design
Single Acting
Mechanical Seals
Inside Mounted
Materials :
Seal Ring Faces : TC and SiC
Seat Faces : SiC and TCs
Elastomer : Viton, TTV, FEP and FFKM
End fitting MOC : SS 316,HAST-C and Carpenter 42
MOC : SS 316 – CHANGE OF MOC ON REQUEST
Operating Cabailities :
Shaft Dia. : 20mm to 80mm
Pressure : Full Vacuum to 8 bar
Temperature : -30°C to 260°C (Depending upon Elastomer)
Speed: 3000 r.p.m.
METAL BELLOW MECHANICAL SEAL
Type 82/C – Grafoil Packing Cartridge mechanical seals are destined for petrochemical, chemical, pharmaceutical and food processing industry, for process pumps. Rotating bellows design acts to clear convolutions and prevent accumulation of debris. These bellow seals are constructed by welding a series of diaphragms together at the edges to form a bellows unit. Recommended for high temperature mediums e.g. hot oils, pitch, tar and other hydrocarbons, fuels, liquid gases and other mediums with low content of abrasives.
Single Acting.
Dual directional.
Inside mounted.
Inherently Balanced Mechanical Seals.
Independent of direction of rotation.
Unitized, Easy-to-Fit Design.
Seal Ring Faces : Carbon, SiC and TC
Seat Faces : TC and SiC
Elastomer : Flexible Graphite
End fitting MOC : SS 316,HAST-C and Carpenter 42
Bellow MOC : HAST -C, AM350 and Inconel
Shaft Dia. : 10mm to 100mm
Pressure : Up to 25 bar
Temperature : -70°C to 350°C
Speed: 3000 r.p.m.
CHEMICA PUMPS AND FILTRATION
CHEMICA PUMPS known as the manufacturers and suppliers of PP PUMPS, PVDF PUMPS, SS PUMPS, AOD PUMPS, PP VALVES, MECHANICAL SEALS AND FILTER PRESSES
PRODUCTS LINK
QUICK LINKS
-
ABOUT US
-
OUR PRODUCTS
-
OUR PRESENCE
-
CONTACT US